Prometheus .999 Silver Paste 10grams    Compare with PMC3 and Art Clay Silver

Prometheus .999 Silver Paste allows for combinations including glass, porcelain and ceramic materials, and due to it's low firing capabilities it is also suitable for firing with sterling silver findings or wires (SV925 and higher quality recommended.

Composition.
Prometheus .999 Silver Paste consists of pure silver particles, binder and water. During firing, the binder burns away and the pure silver particles solidify. 

Prometheus .999 Silver Paste can be used to coat or paint onto organic materials such as leaves, twigs, dry cork clay or paper forms. During the firing process, the binder burns away leaving the fine detail captured in silver. 

Paste be used to join two dry Prometheus .999 fine silver pieces together or to join a dried piece and a fired Prometheus .999 Silver piece together. Use for attaching and firing silver findings and Prometheus pieces together. 

This product is a low-fire clay that can be fired as low as 570ºC or as high as 700ºC  It is pure silver (99.9%) after firing. Can be kiln, torch and gas stove top fired fired.
Firing above 700ºC is not recommended and not necessary.

Kiln Fire: Ramp from room temperature to 570°C - 1 hour hold

Kiln Fire: Ramp from room temperature to 700°C - 1 hour hold for high strength items 

Torch Fire: Maintain Red Glow for 3-5 minutes

Shrinkage: 12-13%

Graphics and Colours should be used as a guide

Click anywhere on the page to refresh quantity pricing.