Prometheus Sunny Bronze Clay 50grams
How to achieve positive firing outcomes
Prometheus Sunny Bronze Clay is a claylike material which turns into a pure, solid golden bronze when fired in a kiln. It is a mixture of micron sized bronze powder, water and an organic binder.
You can achieve a lovely golden metal finish with Prometheus Sunny Bronze Clay. Fired Prometheus Sunny Bronze Clay is a lighter, more radiant version of original Prometheus Bronze Clay which bears a close resemblance in colour to 9ct Yellow Gold after firing.
Prometheus Sunny Bronze Clay can be formed by hand, rolled into a sheet or made into a rope. It can be moulded, textured and even turned on a potter's wheel.
Prometheus® Sunny Bronze Clay can be fired with most lab-created gemstones (cubic zirconias) pre-tested natural stones, glass, glass beads, ceramic and porcelain.
When the clay is fired in a kiln, the organic binder evaporates and burns away. What remains is pure, solid golden bronze.
If there is any fire scale left on a piece after firing, it can be placed in a pickle solution to remove it. The solid bronze piece can then be wire brushed and polished.
Create unique jewellery, ornaments, hollow ware, statutes, sculptures and many other decorative objects.
Use your imagination and let your fingers do the rest!
Prometheus Bronze Clay can be fired in a single or two-stage firing.
SINGLE STAGE Prometheus Bronze Clay Conventional Firing
Preheat your kiln to 820ºC
Place your dried bronze piece onto stainless steel mesh and into the kiln
Wait for the kiln to reach temperature and fire for 30 minutes
After 30 minutes, remove the piece and leave to cool on a heatproof surface. Alternatively quench in water BUT NOT if fireable gemstones or glass have been included in your design.
TWO STAGE (recommended, most successful method) will achieve a brighter golden finish Prometheus Bronze Clay Activated Carbon Firing
Place your dried piece(s) onto stainless steel mesh, and into a kiln at room temperature
Wait for the kiln to heat up to 500°C and fire for 15 minutes
Once finished, remove the piece and leave to cool on a heatproof surface
Preheat your kiln to 820º
Pour 3cm of activated carbon into a stainless steel container and position pieces at least 1.5cm apart.
Cover with activated carbon and place steel container inside the heated kiln
Wait for the kiln to heat back up to 820º and fire for 60 minutes
After 60 minutes, remove the piece and leave to cool on a heatproof surface
HAND HELD TORCH FIRING - Prometheus Sunny Bronze can be torch fired (see cautionary note below) using the same method as for Prometheus Bronze Clay
Prometheus Bronze Clay Torch Firing
When Prometheus Bronze Clay was first introduced, the hand held torch firing method was widely recommend. For valid reasons, it is no longer the manufacturers recommended firing method.
However, it must be mentioned that with perseverance, small pieces of Prometheus Sunny Bronze (maximum 2.5cm and 25mm thickness) can be successfully fired with a handheld gas torch.
Prometheus® Jeweller's Sterling White Bronze Clay can be combined with Prometheus Bronze Clay and Prometheus Copper Clay and fired using the same kiln firing schedule.
Annealing: If your combined pieces are thin and long, then it is recommended that you anneal your pieces in order to maintain high strength and malleability.
Annealing. Heat your pieces at 565°C for 5 minutes and quench in water.
Shrinkage 6-10%
*Prometheus Sunny Bronze Clay is available in 100g 50g 20g packs and Syringe Type 10g
Graphics and Colours should be used as a guide. Although some may be, not all artist projects included are of this particular clay. The clay used in all project graphics is Prometheus Clay.
Click anywhere on the page to refresh quantity pricing.
Prometheus Sunny Bronze Clay 50grams
- Product Code: PSB50
- Availability: 50
-
A$36.00
- Ex Tax: A$32.73