Makin's® Professional™ Ultimate Clay Extruder™ Stainless Steel Edition 

A dream for all clay, especially Silver Metal Clay work. This extruder was designed especially for metal clay.  All clay inside the tube extrudes leaving the cylinder absolutely clean. Use a clay shaper or similar soft silicone tipped tool to remove any small bits left between the rubber spacer and disc for zero waste of clay. The extruder body is stainless steel and will not react to metal clay.

The Makins Hollow Core adaptors, Makins Ultimate Clay Extruder Additional Discs Sets and the Makins Ultimate Clay Extruder Drill Adapter (**refer information below) will work with this extruder.

** Please Note: Any damage caused to any Makins Extruder being used with the Makins Extruder Adaptor (or any other extruder Adaptor brand) is NOT covered under the factory warranty.

Cordless and other electric drill types generate excessive and often, uncontrolled amounts of torque force.
If an Extruder Adaptor is used 1) without the appropriate control over drill settings 2) extended usage 3) used without knowledge of the appropriate material plasticity/malleability of the inserted clay, considerable force and heat generation will be applied within the extruder. This combination has the potential to strip or distort the threads of the extruder endcaps, at one or both ends.

To avoid damaging the extruder, attention, care and extreme caution is recommended when using all extruder adaptors, including the Makins Extruder Adaptor.

WARNING: Choking Hazard-small parts. Not for children under 3 years.

Graphics and Colours should be used as a guide

Click anywhere on the page to refresh quantity pricing.